Aqueous-processed insulating polymer/nanocrystal solar cells with effective suppression of the leakage current and carrier recombination

As one of the most environmentally friendly photovoltaic(PV) conversion equipments,aqueousprocessed CdTe nanocrystal solar cells(NC SCs) have attracted great interest in recent years because of their excellent properties such as high charge-carrier mobility and broad absorption.However,two issues including interfacial recombination and leakage current seriously restrict their performance.In this paper,insulating polymer poly(vinyl pyrrolidone)(PVP) is introduced into CdTe NC SCs to solve the problems.The experimental results of transmission electron microscopy(TEM),atomic force micro scopy(AFM) and dark current measurements,etc.,demonstrate the leakage current is effectively suppressed by introducing PVP.Through further designing device structure,the reduction of interfacial recombination after introducing PVP is confirmed.By strategically taking the advantages of PVP properties(e.g.,water solubility and thermostability),the power conversion efficiency of the devices with PVP is enhanced by almost 37% compared to pure CdTe devices.This work demonstrates an effective and low-cost method to fabricate NC SCs via aqueous route.Moreover,it also proves that appropriate content of insulating polymer is of beneficial in promoting the PV performance.     

Statistics of polymer capture by a nanopore: A Brownian dynamics simulation study

We investigate the statistics of polymer capture by a nanopore using Brownian dynamics simulations. It is found that when the velocity flux is greater than a critical velocity flux, the capture picture is a random selection process, otherwise it tends to a statistical process governed by energetic considerations. In addition, the chain ends capture probability decreases as the chain length increases and satisfies a power-law scaling of P0(N)~N-0.8.     

A modern approach to the solution and analysis of the Simha-Somcynsky model for the description of pressure-volume-temperature properties of polymer fluids

We revisit the Simha-Somcynsky model of polymer fluids with the purpose of developing novel theoretical and computational approaches to simplify and speed up its solution as well as the fitting of experimental data, and decrease its level of mathematical complexity. We report a novel method that allows us to solve one of the two equations of the model exactly, thus putting the level of mathematical difficulty on a par with the one of other models for polymer fluids. Moreover, we describe a computational algorithm capable of fitting all five parameters of the model in an unbiased way. The results obtained reproduce literature results and fit experimental pressure-volume-temperature and solubility parameter data for three polymers very accurately. Moreover, the new techniques allow for the investigation of the model at very low temperatures. Unexpectedly, the model predicts behaviors that could be interpreted as a glass transition, as routinely observed in dilatometry and differential scanning calorimetry, and a glass phase. We compared the predicted and experimental T g’s for cis poly(1,4-butadiene) and found an excellent quantitative agreement.     

Strongly localized states in a single carbon nanotube with polymer molecules

A single-walled carbon nanotube (SWCNT) with conjugated polymer molecules is analyzed via optical spectroscopy. The presence of strongly localized excitonic states in the SWCNT is confirmed using time-integrated photoluminescence (PL). The PL spectrum exhibits extremely narrow width (~0.8 meV) which is attributed to the strong confinement of the states by polymer molecules. In addition, I observed that the excited states are gradually filled as a function of the excitation power, which supports the localized excitonic behavior. Only the ground excitonic state is observed at low excitation powers, but three additional PL peaks appear as the excitation power is increased. Especially, the power-dependent PL spectrum shows a blueshift and increased width, which can be elucidated in terms of quantum confined stark effect and the screening of induced electric fields. Overall, I demonstrate that the presence of polymer molecules induces several localized states in a single SWCNT.     

Fe3O4@C Nanotubes Grown on Carbon Fabric as a Free-Standing Anode for High-Performance Li-Ion Batteries

Recently, Li-ion batteries (LIBs) have attracted extensive attention owing to their wide applications in portable and flexible electronic devices. Such a huge market for LIBs has caused an ever-increasing demand for excellent mechanical flexibility, outstanding cycling life, and electrodes with superior rate capability. Herein, an anode of self-supported Fe₃O₄@C nanotubes grown on carbon fabric cloth (CFC) is designed rationally and fabricated through an in situ etching and deposition route combined with an annealing process. These carbon-coated nanotube structured Fe₃O₄ arrays with large surface area and enough void space can not only moderate the volume variation during repeated Li⁺ insertion/extraction, but also facilitate Li⁺/electrons transportation and electrolyte penetration. This novel structure endows the Fe₃O₄@C nanotube arrays stable cycle performance (a large reversible capacity of 900 mA h g⁻¹ up to 100 cycles at 0.5 A g⁻¹) and outstanding rate capability (reversible capacities of 1030, 985, 908, and 755 mA h g⁻¹ at 0.15, 0.3, 0.75, and 1.5 A g⁻¹, respectively). Fe₃O₄@C nanotube arrays still achieve a capacity of 665 mA h g⁻¹ after 50 cycles at 0.1 A g⁻¹ in Fe₃O₄@C//LiCoO₂ full cells.     

Determination of tensile strength of UHMWPE fiber-reinforced polymer composites

Quasi-static tensile test of UHMWPE fiber-reinforced composite laminate is challenging to perform due to low interlaminar shear strength and low coefficient of friction. Tensile tests proposed in the literature were conducted and limitations associated with each method led to the evolution of a new method. Tensile test of single-ply was realized as the best representative of tensile strength of a composite than tensile test of UHMWPE laminate. A fixture was developed for single-ply tests which increased friction and provided the mechanical constraint to slipping. The fixture is easy to fabricate and has provided repeatable results for eight grades of UHMWPE fiber-based (0/90) fabrics. Reported tensile strengths are in quite high range of 900–1500 MPa.     

Analysis and fate of the hindered amine light stabilizer Tinuvin 622 in polyester powder coatings using high performance liquid chromatography / time of flight mass spectrometry

Hindered amine light stabilizers are used to protect polymers from heat- and light-induced degradation. In this study the oligomeric stabilizer Tinuvin 622 was analysed in-depth employing high performance liquid chromatography/time of flight mass spectrometry (HPLC/TOF-MS) to differentiate products of different manufacturers in respect of their terminating groups and oligomer length. Additionally, the behaviour of the stabilizer in uncured and cured polyester powder coatings was investigated regarding its interaction with the other coating components and chemical changes during the crosslinking process. The extraction efficiency was determined as a function of oligomer length and coating colour.     

Generation of NOON States in Waveguide Arrays

A method to generate NOON states with three photons by injecting photons in an array of three waveguides is presented. Conditional measurements project the wave function in a given (desired) state. In passing, it is shown how the array of three waveguides, that effectively reproduces the interaction of three fields, may be reduced to the interaction of two fields.     

In-situ preparation and electrochromic properties of TiO2/PTPA-HTAN core-shell nanocomposite film

A new star-shaped structure conjugated microporous polymers, poly (2,8,14-tri[4-diphenyl-benzene]-hexaazatrinaphthylene) (PTPA-HATN), was designed and in-situ electrochemically polymerized on the surfaces of FTO electrodes with a directional alignment TiO₂ nanorod array to obtain TiO₂/PTPA-HATN core-shell nanocomposite films. Compared with the PTPA-HATN film, the TiO₂/PTPA-HATN composite film exhibits higher optical contrast and faster response time, with contrast of 57% at 783 nm, coloring time of 3.62 s and discoloring time of 2.55 s (43%, 4.63 s and 4.77 s for PTPA-HATN film, respectively). After 400 cycles, the contrast of nanocomposite film decreased by 28%, while the PTPA-HATN film basically lost its electrochromic properties. A simple three-layer EC prototype device based on TiO₂/PTPA-HATN nanocomposite film constructed with hydrogel electrolyte clearly shows color changes at different voltages. On the one hand, the formation of core-shell porous nanostructure of TiO₂/PTPA-HATN composite film provides a larger ion doping/de-doping interface, shortening the average diffusion length of ions. On the other hand, the large indented polymer-nanorods contact interface makes it difficult for the polymer to detach from the electrode, thus significantly improving the cyclic stability of the composite film.     

Measuring densities of polymers by magneto-archimedes levitation

In magneto-Archimedes levitation, a polymer can be levitated to a balanced position, and its levitation height is mainly related to the density of the polymer. Here, a novel method for measuring the density of polymers based on magneto- Archimedes levitation is proposed. For a designed measurement device, an equation can be fitted by a series of experiments with standard density glass beads. Then, the polymer's density can be calculated via the equation. In this paper, a device with magnets at a distance of 60 mm was chosen as an example. Experimental results showed that the proposed method could measure all types of polymer with an accuracy of 0.002–0.01 g/cm³. Moreover, the proposed method can clearly distinguish between polymers with small density differences (<0.03 g/cm³). Because of its high accuracy, high sensitivity, low cost and convenience, the proposed method could be widely used in polymer testing, especially in density-based testing.